Stephen Stanley Co., Inc. Distributor for Leading Manufacturers of Fine Commercial Flooring

Moisture Remediation

Back to Manufacturer

PHOTO GALLERY

ARDEX Moisture Control System:

• Solvent-free, alkali resistant, low viscosity, two coat epoxy resin system
• Used prior to the installation of ARDEX engineered cements over concrete
• For new or existing concrete that has moisture levels in excess of the maximum allowed by the manufacturer of the finished floor covering or coating

USAGE
The ARDEX MC MOISTURE CONTROL SYSTEM is an epoxy-based moisture management system formulated to suppress excessive moisture vapor in new or existing concrete prior to the installation of ARDEX toppings and underlayments. It is especially suited to treat areas of new concrete where the construction schedule is such that adequate drying of the concrete cannot be afforded. ARDEX MC is also recommended over existing concrete where the level of moisture emissions from the slab exceeds the maximum allowed by the manufacturer of the finish floor covering or coating.

DESCRIPTION
The ARDEX MOISTURE CONTROL SYSTEM consists of ARDEX P-MC PRIMER, which is yellow in color and is used as the first coat, and ARDEX S-MC SEALER, which is green in color and serves as the sealer coat that will receive a sand broadcast layer. ARDEX MC is a highly reactive epoxy system that produces an extremely hard surface, which tenaciously bonds to the substrate. This two coat system reduces moisture emissions to an acceptable level, even over new concrete that is less than 28 days old, and serves as the priming system for Ardex engineered cements.