National’s best selling 5700 Ride-on Scraper is narrow enough to fit through residential doorways, and has enough torque to make quick work of commercial flooring removal. Featuring 12-AGM 180-amp hour batteries, an ergonomic seat and a swivel-head blade holder, this scraper is a must have.
Power Supply: Battery
Width: 24.5 in
Height: 50 in
Length: 58 in
Weight: 2,244 lbs
Removable Weight: 185 lbs front
Weight (Machine Only): 2,059 lbs
Speed: up to 120 ft/min
Voltage & Frequency: 115V/60Hz
| Item # | Dimensions | Blade Use |
| Heavy-Duty Blades | ||
| 6281 | 3″ 8″ .094″ | These heavy-duty blades work on VCT, VAT, wood, tile, rubber, epoxy, elastomeric coatings, scraping thin-set, and glued ceramic. |
| 6284 | 3″ 12″ .094″ | |
| 6285 | 3″ 6″ .094″ | |
| 6286 | 3″ 10″ .094″ | |
| Self-Scoring Blades | ||
| 6257-BU: Blade Self-scoring 90 degree | 3″ 9″ .062″ BU | These angled self-scoring work on attached cushion, unitary or secondary backing, vinyl back, soft to medium PVC, linoleum, carpet tiles, soft cork, enhancer, and unibond hot melts. |
| 6258-BU: Blade Self-scoring 90 degree | 3″ 12″ .062″ BU | |
| 6276-BU: Blade Self-scoring 45 degree | 3″ 10″ .094″ BU | |
| 6277-BU: Blade Self-scoring 45 degree | 3″ 12″ .094″ BU | |
| 6278-BU: Blade Self-scoring 45 degree | 3″ 14″ .094″ BU | |
| Item # | Dimensions | Blade Use |
| Straight Shanks | ||
| 7070-2 | 4″ x 2″ x .500″ | Designed to remove ceramic, wood, and thick epoxy |
| 7070-3 | 4″ x 3″ x .500″ | |
| 7070-4 | 4″ x 4″ x .500″ | |
| 7070-6 | 4″ x 6″ x .500″ | |
| Angle Shanks | ||
| 7071-2 | 4″ x 2″ x .500″ | Designed to remove ceramic, wood, and thick epoxy |
| 7071-3 | 4″ x 3″ x .500″ | |
| 7071-4 | 4″ x 4″ x .500″ | |
| 7071-6 | 4″ x 6″ x .500″ | |
| Straight Shank with Carbide Tip | ||
| 7072-2 | 4″ x 2″ x .500″ | These shanks work with a similar application variety as the 7070 shanks. Perfect for elastomeric coatings. |
| 7072-3 | 4″ x 3″ x .500″ | |
| 7072-4 | 4″ x 4″ x .500″ | |
| 7072-6 | 4″ x 6″ x .500″ | |
| Angle Shank with Carbide Tip | ||
| 7079-2 | 4″ x 2″ x .500″ | These shanks are designed for ceramic removal and thin-set re-scraping. The 552 angle shank with carbide tip is designed for light-duty commercial- and residential-grade ceramic tile and hard good removal. |
| 7079-4 | 4″ x 4″ x .500″ | |
| 7079-6 | 4″ x 6″ x .500″ | |
| Tapered Wood Floor Shank | ||
| 7075-8 | 8″ x 2″ x .300″ | The longer taper works great on tough wood floors (glued and nailed). The long length allows the blade to easily slide under tough materials. |
| 7075-11 | 11″ x 2″ x .300″ | |
| 7077-8 | 8″ x 3.5″ x .300″ | |
| 7077-11 | 11″ x 3.5″ x .300″ | |
| 1086 Blades | ||
| 401985 | 3″ 6″ .094″ | These Japanese-style blades are the ideal choice for challenging jobs. |
| 401981 | 3″ 8″ .094″ | |
| 401986 | 3″ 10″ .094″ | |
| 401984 | 3″ 12″ .094″ | |
| 401982 | 3″ 14″ .094″ | |
| 401983 | 3″ 27″ .094″ | |
| 401974 | 4″ 6″ .094″ | |
| 401975 | 4″ 8″ .094″ | |
| 401979 | 4″ 10″ .094″ | |
| 401976 | 4″ 12″ .094″ | |
| 401977 | 4″ 15″ .094″ | |
| 401978 | 4″ 24″ .094″ | |
| 401980 | 4″ 27″ .094″ | |
| Standard Blades | ||
| 147 | 4″ 6″ .062″ | These heavy-duty blades are designed to remove soft goods, carpet, and vinyl flooring. Their .062″ thickness offers flexibility to maximize the shear-point angle. |
| 148 | 5″ 6″ .062″ | |
| 135 | 5″ 16″ .062″ | |
| 136 | 5″ 8″ .062″ | |
| Heavy-Duty Blades | ||
| 6281 | 3″ 8″ .094″ | These heavy-duty blades work on VCT, VAT, wood, tile, rubber, epoxy, elastomeric coatings, scraping thin-set, and glued ceramic. |
| 6282 | 3″ 14″ .094″ | |
| 6283 | 3″ 27″ .094″ | |
| 6284 | 3″ 12″ .094″ | |
| 6285 | 3″ 6″ .094″ | |
| 6286 | 3″ 10″ .094″ | |
| 6240 | 4″ 6″ .094″ | |
| 6241 | 4″ 8″ .094″ | |
| 6242 | 4″ 12″ .094″ | |
| 6243 | 4″ 15″ .094″ | |
| 6244 | 4″ 24″ .094″ | |
| 6245 | 4″ 10″ .094″ | |
| 6246 | 4″ 27″ .094″ | |
| Extra Heavy-Duty Blades | ||
| 6270 | 1.5″ 3″ .250″ | They work on VCT, VAT, wood, tile, lighter ceramic, re-scraping thin-set, all carpets, cork, elastomeric coatings, and re-scraping rubber and urethane coatings. |
| 6271 | 3″ 6″ .250″ | |
| 6273 | 3″ 11″ .250″ | |
| 6290 | 3″ 6″ .187″ | |
| 6291 | 3″ 8″ .187″ | |
| 6292 | 3″ 12″ .187″ | |
| 6293 | 3″ 14″ .187″ | |
| 6294 | 3″ 27″ .187″ | |
| 1-Inch Blades | ||
| 7091 | 1″ 4″ .094″ | Designed for VCT and adhesive re-scrape. They also work well for parking deck coatings, epoxies, and elastomeric coatings. |
| 7092 | 1″ 8″ .094″ | |
| 7093 | 1″ 10″ .094″ | |
| 7094 | 1″ 12″ .094″ | |
| Razor/Scraper Blades | ||
| 363-2 | .750″ 8″ .032″ | Designed for superhard thin epoxies, thin mil coatings (like urethane paint), poured elastomeric coatings up to 60 mil, and hard to remove adhesives. |
| 368-8 | .937″ 8″ .045″ | |
| 368-12 | .937″ 12″ .045″ | |
| 368-15 | .937″ 15″ .045″ | |
| Premium High-Tempered Blades | ||
| 7050-200 | 3″ 6″ .062″ | They work on all glued-down carpets, VCT, VAT, rubber tile, cork, and re-scraping adhesive and elastomeric coatings. |
| 7050-201 | 3″ 8″ .062″ | |
| 7050-202 | 3″ 10″ .062″ | |
| 7050-203 | 3″ 12″ .062″ | |
| 7050-204 | 3″ 14″ .062″ | |
| 7050-205 | 3″ 27″ .062″ | |
| Self-Scoring Blades | ||
| 6257-BU: Blade Self-scoring 90 degree | 3″ 9″ .062″ BU | These angled self-scoring work on attached cushion, unitary or secondary backing, vinyl back, soft to medium PVC, linoleum, carpet tiles, soft cork, enhancer, and unibond hot melts. |
| 6258-BU: Blade Self-scoring 90 degree | 3″ 12″ .062″ BU | |
| 6259-BU: Blade Self-scoring 90 degree | 3″ 14″ .062″ BU | |
| 6260-BD: Blade Self-scoring 90 degree | 3″ 6″ .094 BD | |
| 6265-BD: Blade Self-scoring 90 degree | 3″ 8″ .094″ BD | |
| 6266-BD: Blade Self-scoring 90 degree | 3″ 10″ .094″ BD | |
| 6276-BU: Blade Self-scoring 45 degree | 3″ 10″ .094″ BU | |
| 6277-BU: Blade Self-scoring 45 degree | 3″ 12″ .094″ BU | |
| 6278-BU: Blade Self-scoring 45 degree | 3″ 14″ .094″ BU | |
| 6279-BU: Blade Self-scoring 45 degree | 3″ 27″ .094″ BU | |
| 6247-BU: Blade Self-scoring 90 degree | 4″ 10″ .094″ BU | |
| 6249-BU: Blade Self-scoring 90 degree | 4″ 12″ .094″ BU | |
| 6248-BU: Blade Self-scoring 90 degree | 4″ 24 .094″ BU | |
| 6256-BU:* Blade Self-scoring 90 degree | 4″ 6″ .062″ 4″h BU | |
| 6261-BU:* Blade Self-scoring 90 degree | 3″ 12″ .062″ 4″h BU | |
| 6262-BU:** Blade Self-scoring 90 degree | 4″ 6″ .094 4″h BU | |
| 6264-BU:** Blade Self-scoring 90 degree | 3″ 12″ .094″ 4″h BU | |